Automatic Transfer Switch Device Factory, Suppliers - China Automatic Transfer Switch Device Manufacturers

Submit Your Inquiry

Please feel free to send your message to us in the following form, we will contact you and provide you with the corresponding service as soon as possible, please write in English.

ATS Controller Y-700N

model:Y-700N Operating Voltage : 1.DC 8.0V~35.0V,powersupply constantly. 2.HTS220/HWS560 Power mould supply power(No battery charge) 3.AC powerL1N1/L2N2 supply.Voltage rangeAC(160~280V)(Y-700/B、Y-700/BI)Power Consumption :<3W(Standby mode:≤2W) Rated Frequency :50/60HzClose And Open Trip Relay Output :16A 250V AC Free voltage relay outputProgrammable Relay Output: 16A/7A 250VAC Free voltage relay outputDigital Input: Connect...
Learn more
ATS Controller Y-800

Programmable output relay capacity: 10A 277VAC passive output 10A 250VAC passive output EMC test criteria: Complies with GB/T 14048.11-2024 and IEC/EN 60947-6-1 Outline dimension: 260mm*180mm*55mm Pore size :167mm*236mm Working temperature: (-20~+70)℃ Working humidity:(20~93)%RH Storage temperature: (-30~+80)°℃ Levels of protection :IP20 Weight: About 1 kg
Learn more
ATS Controller Y-703N

The Y-703N ATS controller is used in conjunction with a dual power transfer switch (TSE) to form an automatic transfer switch (ATSE). It detects abnormal conditions of grid parameters (overvoltage, undervoltage, phase loss, over frequency, under frequency,misphase sequence, etc.) and then control the transfer switch (TSE) transfer according to a predetermined mode of operation to the suitabl power supply, to ensure the continuous power supply on the load side.
Learn more
ATS Controller W2/W3 Series

W2,W3 Dual Power Controller is an intelligent control device for dual power automatic switching system (ATS) , which is mainly used to monitor and manage the working state of two power sources (common power supply and standby power supply) , and when the power failure to achieve automatic switching, to ensure that the continuous power supply load. Can adapt to the company's C-type, Y-type, W-type dual power supply, real-time monitoring of two power three-phase voltage, three-phase current, fr...
Learn more
ATS controller Y-700

model:Y-700 Operating Voltage : 1.DC 8.0V~35.0V,powersupply constantly. 2.HTS220/HWS560 Power mould supply power(No battery charge) 3.AC powerL1N1/L2N2 supply.Voltage rangeAC(160~280V)(Y-700/B、Y-700/BI)Power Consumption :<3W(Standby mode:≤2W) Rated Frequency :50/60HzClose And Open Trip Relay Output :16A 250V AC Free voltage relay outputProgrammable Relay Output: 16A/7A 250VAC Free voltage relay outputDigital Input: Connecti...
Learn more
ATS switch Cabinet floor-to-ceiling

ATS Cabinet Floor Type Dual circuit power input, automatic detection and switch (support a variety of switching modes); Wide capacity setting, 63-4000A, flexible configuration according to the back-end load capacity; High reliability, adopt well-known brands switch devices, equipped with lightning protection device, electrical performance factory inspection; Intelligent monitoring, equipped with a 4.3-inch touch screen/smart meter, it could detect the current, power and power consumption....
Learn more
ATS switch cabinet

ATS Cabinet Wall-mounted Dual circuit power input, automatic detection and switch (support a variety of switching modes); Wide capacity setting, 63-4000A, flexible configuration according to the back-end load capacity; High reliability, adopt well-known brands switch devices, equipped with lightning protection device, electrical performance factory inspection; Intelligent monitoring, equipped with a 4.3-inch touch screen/smart meter, it could detect the current, power and power consumptio...
Learn more
JXF-225A power Cbinet

The dual power supply cabinet is provided with two power supply incoming line switches and an automatic transfer switch. Under normal circumstances, one power supply as the main power supply for the load power, the other power supply as a backup power in the hot standby state. When the main power supply fails (such as power failure, abnormal voltage, etc.) , the switch will automatically or manually switch the load to the standby power supply, so that the load can continue to obtain power sup...
Learn more
JXF-800A power Cbinet

The dual power supply cabinet is provided with two power supply incoming line switches and an automatic transfer switch. Under normal circumstances, one power supply as the main power supply for the load power, the other power supply as a backup power in the hot standby state. When the main power supply fails (such as power failure, abnormal voltage, etc.) , the switch will automatically or manually switch the load to the standby power supply, so that the load can continue to obtain power sup...
Learn more