Makullin canja wurin atomatik samfuri ne mai fasaha wanda kamfaninmu ya ƙirƙira, Bin ƙa'idodin GB/T14048.11, wanda kuma ya yi daidai da 《Lambar Kariyar Wuta don Gine-ginen Farar Hula Masu Tasowa》 , 《Jagororin Tsarin Hasken Gaggawa》 da sauransu. Sassan da sassan samfurin sun fuskanci tsufa da tantancewa mai tsauri. An ƙarfafa samfurin da aka gama kuma an tsufa shi a zafin jiki mai tsayi na tsawon awanni 24, kuma a ƙarshe ya wuce binciken lodi kafin ya bar masana'anta. Don haka yana tabbatar da aminci da amincin samfurin. Ya dace da AC 400V da ƙasa, mita mai ƙima 50Hz. A cikin samar da wutar lantarki, akwai asarar lokaci, wuce gona da iri. A ƙarƙashin ikon mai sarrafawa, makullin canja wuri na iya canza kaya da sauri daga samar da wutar lantarki ta gama gari zuwa samar da wutar lantarki ta madadin (ƙarfin wutar lantarki na madadin dole ne ya zama na al'ada a wannan lokacin) idan akwai yanayi na lahani kamar ƙarancin wutar lantarki. Mai amfani kuma zai iya sanya nauyin a matsakaicin matsayi idan ana buƙata, don kada nauyin ya haɗu da wutar lantarki ta yau da kullun ko kuma wutar lantarki mai jiran aiki. Ana amfani da wannan samfurin galibi don manyan kaya da na sakandare da gwamnati ta ƙayyade, kuma ana amfani da shi sosai a fannin kashe gobara, bayanai game da gidan waya da sadarwa, asibitoci, otal-otal, jigilar jirgin ƙasa na birni, gine-gine masu tsayi, layukan haɗa masana'antu, tashoshin talabijin, da sauransu. Wurare masu ci gaba da samar da wutar lantarki. Yawancin lokaci tushen wutar lantarki na iya zama grid ɗin wutar lantarki, saitin janareta mai kunna kai, fakitin baturi, da sauransu.

□ Zafin iska na yanayi: zafin yanayi -5℃ zuwa +40℃, kuma matsakaicin ƙimar zafin jiki na awanni 24 bai wuce +35°C ba. Masu amfani waɗanda zafin iska na yanayi ya fi +40°C ko ƙasa da -5°C ya kamata su tuntuɓi masana'anta.

□ Mafi girman zafin danshi a yanayi: idan zafin ya kai +40℃, danshin bai wuce 50% ba, kuma matsakaicin danshin danshi a kowane wata Digiri 90%, mai jure tasirin iska mai danshi a kan teku, kuma zai iya ba da damar ƙarin danshin danshi a ƙananan zafin jiki, ya kamata a ɗauki matakai na musamman don danshi lokaci-lokaci da canje-canjen zafin jiki ke haifarwa.

□ Tsayin shigarwa: Tsayin wurin shigarwa bai wuce mita 2000 ba. Idan aka yi amfani da shi a wurare mafi tsayi, ya kamata a yi la'akari da cewa ƙarfin dielectric da tasirin sanyaya iska sun ragu, don Allah a tuntuɓi masana'anta.

□ Matsayin Gurɓata muhalli: Matsayin gurɓatar muhalli na wurin shigarwa shine mataki na 3.

□ Nau'in shigarwa: IV.

□ Juyawar shigarwa: an sanya samfurin a cikin kabad, matsakaicin juyi shine ± 22.5°.

□Nisa tsakanin lanƙwasa: Nisa tsakanin lanƙwasa shine 30mm idan AC 400V ne. Nisa tsakanin lanƙwasa lokacin da AC 690V yake 60mm.

□ Amfani da rukuni: AC-33iB.

Dole ne ƙwararru su gudanar da bincike da gyara. Ya kamata a yanke duk wani kayan wutar lantarki na waje yayin dubawa da gyara. Domin a ci gaba da aikin makullin wutar lantarki da kuma kiyaye shi cikin kyakkyawan yanayi, za a fara duba gyara cikin shekara guda bayan shigarwa, kuma a riƙa yin gyare-gyare akai-akai aƙalla sau ɗaya a shekara bayan haka.