• 2021 wholesale price Chint Breakers - Mold case circuit breaker-YEM1E-800 – One Two Three
  • 2021 wholesale price Chint Breakers - Mold case circuit breaker-YEM1E-800 – One Two Three
2021 wholesale price Chint Breakers - Mold case circuit breaker-YEM1E-800 – One Two Three
  • Description
  • Tags
  • Product detail

    Name Details
    Enterprise code Shanghai Yuhuang Electric Co.,ltd
    Product category Moulded Case Circuit
    Design code 1
    Product code Moulded Case Electronic Circuit Breaker
    Current rank 100,225,400,630,800,1250
    Breaking capacity L,M,H
    Pole 3P,4P
    Part no. 300 no part(please see the release part no.table)
    Rated current 32A~1250A
    Use no. None=Power distribution type breaker 2=Protect motor
    Operation type None=Handle direct operation,P=Electric operation,Z=Rotating handle operation
    Writing None=Front board connection,R=Behind board connection,PR=Plug-in connection

    Product summary

    YEM1E series moulded case electronic circuit breaker(hereinafter referred to circuit breaker) is applied in the circuit of AC 50HZ/60HZ,its rated insulation voltage to 800V. It work in rate working voltage is 690 V or below, and the rate working current is 800A. It is used to transfer infrequent motor start. The circuit breaker has a long tome delay against overload. Short circuit short time time delay time limit,short circuit short time delay fixed time limit,short circuit instantaneous protection function,it also can protect the circuit and power supply equipment from damage.
    1.The circuit breaker protection features are complete and accurate,which can improve the reliability of power supply and avoid unnecessary power outages.
    2.The circuit breaker has the advantages of small size,high breaking capacity,short arcing,anti-vibration.
    3.The circuit breaker can be installed vertically or horizontally.
    4.The circuit breaker has an isolation function.
    5.The circuit breaker can’t be reserved into the line, that is only 1/3/5 are connected to the power line,and 2/4/6 are connected to the load line.

    Product feature

    1.Environment temperature:-5℃~+40℃.
    2.Altitude of the installation site does not exceed 2000m.
    3.The relative humidity of the installation site should not exceed 50% at the highest temperature of +40℃,and can be higher at lower temperatures,such as relative humidity of 90% at 20 degrees Celsius. Special measures should be taken for occasional condensation due to temperature changes.
    4.Pollution level is 3.
    5.The circuit breaker passes the test of GB/T2423.10 and can withstand a frequency of 2HZ~13.2HZ, a displacement of ±1mm,a frequency of 13.2HZ~100HZ,and an acceleration of ±0.7g.
    6.The main circuit installation category of the circuit breaker is Ⅲ,and the remaining auxiliary circuit and control circuit installation category is Ⅱ.
    7.The circuit breaker is suitable for electromagnetic environment A.
    8.Wet tropical type(TH type) circuit breaker meets the requirements of GB/T2423.4 test and can withstand the influence of humid air,smoke,oil mist and mold.
    9.The circuit breaker shall be installed in a place where there is no risk of explosion and no conductive dust,no enough corrosion metal and damage to insulation.
    10.Storage conditions:ambient air temperature is-40℃~+70℃.

  • 100a Breaker 400amp Circuit Breaker Andeli Circuit Breaker Circuit Breaker Amp Elcb Breaker Industry Circuit Breaker Mould Breaker Tuya Wifi Circuit Breaker Vacuum Circuit Breaker Wifi Circuit Breakers
Welcome to tell us your needs
Welcome friends and customers at home and abroad to cooperate sincerely and create brilliance together!
Inquiry